Difference between revisions of "Delay dim interior lights"
(Created page with ' Installing a delay dim interior light in drivers side. Light is from a late ’80′s early ’90′s golf/jetta carat/wolfsburg models, looks like standard vanagon inter…') |
MariusStrom (talk | contribs) (Re-adding captions) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | == Installing a delay dim interior light in driver's side == | |
| − | Light is from a late ’80′s early ’90′s | + | Light is from a late ’80′s early ’90′s Golf/Jetta Carat/Wolfsburg models, looks like standard Vanagon interior light with some additional circuitry, (VW part number, 191947111 “interior light with delayed switch-off”). Get it with the connector, cut the wires on the donor about 4 inches long. |
| − | Stock | + | Stock driver's side interior light pries out. Cut the wires about 2" from light. |
| − | Very simple splicing | + | Very simple splicing: 2 red wires (power) on van to the light’s 2 reds, the 2 brown wires on van (ground) to matching 2 on the light, and the brown with white stripe on van (switched ground, door switch) to matching wire. Pictures below show butt connecters used. |
| − | Reinstall light. Its about a 6-8 second delay after last door closes. | + | Reinstall light. Its about a 6-8 second delay after the last door closes. |
| − | The bonus is that the delay works on all the lights and all the doors, slider, back hatch, pass. door (if you have door switches on slider and back hatch ). Yup, just by installing that one light at driver’s position. | + | The bonus is that the delay works on all the lights and all the doors, slider, back hatch, pass. door (if you have door switches on slider and back hatch). Yup, just by installing that one light at driver’s position. |
| − | [[Image:Img 1064.jpg]] | + | [[Image:Img 1064.jpg|thumb|left|200px|View of circuitry]] |
| − | [[Image:Img 1062.jpg]][[Image:Img 1061.jpg]] | + | [[Image:Img 1062.jpg|thumb|left|200px|Light]] |
| + | |||
| + | [[Image:Img 1061.jpg|thumb|left|200px|Connections]] | ||
| + | |||
| + | [[Category:Electrical]] | ||
Latest revision as of 18:49, 3 June 2010
Installing a delay dim interior light in driver's side
Light is from a late ’80′s early ’90′s Golf/Jetta Carat/Wolfsburg models, looks like standard Vanagon interior light with some additional circuitry, (VW part number, 191947111 “interior light with delayed switch-off”). Get it with the connector, cut the wires on the donor about 4 inches long.
Stock driver's side interior light pries out. Cut the wires about 2" from light.
Very simple splicing: 2 red wires (power) on van to the light’s 2 reds, the 2 brown wires on van (ground) to matching 2 on the light, and the brown with white stripe on van (switched ground, door switch) to matching wire. Pictures below show butt connecters used.
Reinstall light. Its about a 6-8 second delay after the last door closes.
The bonus is that the delay works on all the lights and all the doors, slider, back hatch, pass. door (if you have door switches on slider and back hatch). Yup, just by installing that one light at driver’s position.
